What is an RFID system?
An RFID system is a system that can read smart cards or barcodes.
It is usually used to unlock doors or to clock in and out at work.
You can now use an RFID system with your fixed terminal and therefore, your employees can clock in or out using a Smart Card or barcodes.
Which Technologies can be used?
All technologies listed below can be used. The only restriction is that you must use a system with numbers only, no letters.
RFID
Mifare
Felica
NFC
HID
Barcodes
If you have any compatibility or set-up questions, you can send an email to the following address: [email protected]
How can I set up my RFID system?
1) Once you have chosen your technology, you have to plug it with a USB cord, in your pre-installed terminal with a USB cord, wether it's on a Computer or a Tablet.
*Note that you may need an adaptor if your terminal is installed on a tablet.
2) The next step is to change your employee's PIN in their profile under the ''employment'' section. The new PIN has to be the codes of the Smart Cards or barcodes.
3) When the terminal is open and it reads the employee'S Smart Card or a barcode, his PIN will be automatically entered.